Autor Wątek:  New Routeeeeeeeeeeeeeeee!  (Przeczytany 12969 razy)

0 użytkowników i 1 Gość przegląda ten wątek.

Anonymous

  • Gość
New Routeeeeeeeeeeeeeeee!
« dnia: 02 Listopada 2004, 15:20:25 »
I've install the new route, but i can't play it! Please help me!

Offline Winger

  • Administrator
  • Wiadomości: 1465
    • Zobacz profil
    • http://www.winger.eu07.pl
  • Otrzymane polubienia: 1
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #1 dnia: 02 Listopada 2004, 18:37:31 »
How can you expect for anyone to help you if you didn't wrote a single detail about your problem?

Write what route, what version of simulator do you have, what patches, what is the exact error message, what shows end of log file...

Without these (at least), nobody will be able to help.
Pozdrawiam,
Winger

Balage

  • Gość
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #2 dnia: 04 Listopada 2004, 18:25:40 »
Hi,

I have the same problem. I installed the ns scenery and:
- if I started the EU 07-503 train activity, there was no overhead wire in the station. So if I tried to rise the pantograph ("O") it rose and fall back. So I got no electricity, no air pressure, etc. I could not move the train.
- if I started the EN 57 train activity, I presumably got the overhead electricity (no wires seen either), because the air compressor started, but I could still not move the train. (I pressed "O" then "M" then "X" then "C" then "," then "D" then "+", but that's it. Even if I waited long enough between the buttons)

Thank you for any advise:

Balage

Offline Bartek

  • Wiadomości: 378
  • MaSzyna Team Member since 2003
    • Zobacz profil
    • http://republika.pl/gliniecki
  • Otrzymane polubienia: 1
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #3 dnia: 04 Listopada 2004, 18:43:05 »
The Nowy Swiat - Krosowo scenery is somehow original: it has NO wires. So when you start it pantographs are already up, you should process standard procedure without rising the pantographs (so, Shift + M, Shift + X, Shift + C etc.).
Pozdrawiam z Gdyni Wielkiego Kacka,
Bartek

Balage

  • Gość
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #4 dnia: 04 Listopada 2004, 21:19:18 »
Interesting, what you say, Bartek.
But the problem still exists.

At the EU 07-503 activity no pantograph is in up position if you start. You can clearly see it, if you move to the back wall of the cabine (down arrow) and turn. If you try to rise it, it will fall back as described before. You can check, wether there is any power coming in by looking at the right voltige meter. It stands on zero volts.
If you don't try to rise the pantograph, just push "M", the blue light appears. Then if you push "X" the right swich of the first row on the table jumps over. Then if you push "C" nothing happens. No swich moves, no sound to be heard, the air pressure does not change.
However, if you push the "V" button, a sound of something appears, but nothing changes. The sound keeps on, even if you turn off the main circuit "m". After a wile, the sound stops similarly to a compressor stopping. No idea, what it could be.
But as I told, no sign of power on the engine, so the compressor does not start and no power to move.

Any idea?

Balage

Offline Bartek

  • Wiadomości: 378
  • MaSzyna Team Member since 2003
    • Zobacz profil
    • http://republika.pl/gliniecki
  • Otrzymane polubienia: 1
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #5 dnia: 04 Listopada 2004, 21:48:17 »
OK, small tip :)

Author of this route, Bizon, pointed out that his scenery needs the latest version of MaSzyna. The latest version of MaSzyna is unofficial version from 16 July. There is no link to it in the Download section of the Website because this version is still unofficial and buggy (more buggy than official versions :) ).

You can download it from here: http://www.eu07.pl/pliki/eu07-160704-unoff.rar  (48 MB)

For the time being, rather don't overwrite your older files with this new version. Simply install it in a separate folder for NS-Krosowo scenery only.
Be sure to check out new feature: press F4 key to switch to camera situated outside the train. Press it again to be back in the cabin.
Pozdrawiam z Gdyni Wielkiego Kacka,
Bartek

Balage

  • Gość
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #6 dnia: 05 Listopada 2004, 10:45:17 »
Thanks Bartek.
This could explain the problem. But if so, why did you put up the ns scenario for downloading, if no environment is available for download to handle it?

I try to load the big rar file, but till now I did not succeed. It stopped downloading at 19,8 MB several times. I keep on trying.

I also have a problem using this forum. As I don't speak polish, I can understand the content of the massages in the English forum, but I can't understand the buttons and commands as Podglad, Wyslij, etc.
It is rather by accident, wether my massage appears in the forum or not. What is the exact way (sequence of buttons) to write a comment into the forum?

Thank you for your assistance,
best regards:

Balage

Offline Bartek

  • Wiadomości: 378
  • MaSzyna Team Member since 2003
    • Zobacz profil
    • http://republika.pl/gliniecki
  • Otrzymane polubienia: 1
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #7 dnia: 05 Listopada 2004, 18:00:03 »
Nowy temat - new topic
Odpowiedz - reply
Podglad - view
Wyslij - send
Pozdrawiam z Gdyni Wielkiego Kacka,
Bartek

Anonymous

  • Gość
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #8 dnia: 07 Listopada 2004, 17:10:01 »
That explains why I could not get a train to move with this route.
I have tried downloading that unofficial version but I am also having problems downloading it, it is a very slow connection and it keeps cutting out.

--
Jason M

Offline Quark-t

  • Administrator
  • Wiadomości: 3585
  • Inżynier testu
    • Zobacz profil
    • Automatix Sp. z o.o.
  • Otrzymane polubienia: 45
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #9 dnia: 07 Listopada 2004, 20:35:02 »
Just try to use one of the download managers (f.e.: Download Accelerator Plus http://www.speedbit.com). It will solve the problem.
Pozdrawiam, Quark-t

Anonymous

  • Gość
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #10 dnia: 07 Listopada 2004, 22:14:32 »
Cytat: "Quark-t"
Just try to use one of the download managers (f.e.: Download Accelerator Plus http://www.speedbit.com). It will solve the problem.


Thanks for that, I have used getright to download it, took about an hour though with broadband.

Just about to install it.

--
Jason M

Balage

  • Gość
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #11 dnia: 08 Listopada 2004, 16:49:49 »
Hi!

Thank you, Bartek!
I finally downloaded the new version with GoZilla. It works!

The new feature with F4 is superb! So you can really shunt around in the industrial area (after you figure out, how to switch the switches :-)).
If I only knew, what the task is ....!

I'm glad to know, that now I have to push the "Wyslij" button ... :-)

Greetings:

Balage

Balage

  • Gość
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #12 dnia: 09 Listopada 2004, 10:54:12 »
Hi,

so once again: could anybody please tell me, what the task is in the manowrewo1 and 2 scenario in the ns version?

Thanks:

Balage

Anonymous

  • Gość
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #13 dnia: 09 Listopada 2004, 19:39:49 »
Cytat: "Balage"
Hi,

so once again: could anybody please tell me, what the task is in the manowrewo1 and 2 scenario in the ns version?

Thanks:

Balage


Yes I wish I knew that as well.
It is great being able to look outside the train but how do you move the view up and down, I tried using the numbers on the num pad but that applied the brakes on my train.

Also I presume there is no way of seeing a clock in the sim, I have looked at some of the timetables but you would have to have your own clock set to the start time to use them.

Thanks in advance.

--
Jason M

Offline Bartek

  • Wiadomości: 378
  • MaSzyna Team Member since 2003
    • Zobacz profil
    • http://republika.pl/gliniecki
  • Otrzymane polubienia: 1
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #14 dnia: 09 Listopada 2004, 20:00:06 »
Cytat: "Anonymous"
Yes I wish I knew that as well.


We all wish we knew it :) This route is unfinished and the description is missing...

Cytuj
It is great being able to look outside the train but how do you move the view up and down, I tried using the numbers on the num pad but that applied the brakes on my train.


Page Up - go up
Page Down - go down
Arrows - move around
Shift + [keys above] - move slowly

Cytuj
Also I presume there is no way of seeing a clock in the sim, I have looked at some of the timetables but you would have to have your own clock set to the start time to use them.


There is a clock in Hasler (speedometer). Take a closer look at it.
Pozdrawiam z Gdyni Wielkiego Kacka,
Bartek

Anonymous

  • Gość
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #15 dnia: 09 Listopada 2004, 23:01:19 »
Thanks for the reply Bartek.

--
Jason M

Balage

  • Gość
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #16 dnia: 10 Listopada 2004, 14:13:39 »
Cytat: "Bartek"
Cytat: "Anonymous"
Yes I wish I knew that as well.


We all wish we knew it :) This route is unfinished and the description is missing...


Maybe you don't have it, but at least if we could read the instructions:

"Bocznica w zakładzie.
Właśnie przyjechał skład towarowy prowadzony
przez SM42-174. Musisz przetoczyć lokomotywą
SM03-180 wagony na różne bocznice w celu ich
rozładowania.
--------------------------------------------
W pliku manewrowo.htm znajdziesz
dokładny opis i mapę !"

and

"Bocznica w zakładzie.
Musisz zestawić skład z wagonów rozmieszczonych
na różnych torach w zakładzie. Wagony należy
ustawić na głównym torze, kawałek za SM42-174
--------------------------------------------
W pliku manewrowo.htm znajdziesz
dokładny opis i mapę !"

does it give any advice or information?

Balage

Offline Winger

  • Administrator
  • Wiadomości: 1465
    • Zobacz profil
    • http://www.winger.eu07.pl
  • Otrzymane polubienia: 1
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #17 dnia: 10 Listopada 2004, 14:42:58 »
Cytat: "Balage"

"Bocznica w zakładzie.
Właśnie przyjechał skład towarowy prowadzony
przez SM42-174. Musisz przetoczyć lokomotywą
SM03-180 wagony na różne bocznice w celu ich
rozładowania.
--------------------------------------------
W pliku manewrowo.htm znajdziesz
dokładny opis i mapę !"


It's something like:
Side track in some factory.
A freight train was just brought by SM42-174 locomotive. You have to use SM03-180 to dispatch cars from that train to different tracks for unloading.
In manewrowo.htm file you'll find instructions and a map.

The problem is, that there is no manewrowo.htm file and there never was.

The second part is the same, it just says you need to set up a consist from cars on the factory's different tracks. Again, it points you to non-exiting file for instructions.

I'll push the author to make these instructions.
Pozdrawiam,
Winger

Balage

  • Gość
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #18 dnia: 10 Listopada 2004, 15:03:25 »
Thank you Winger! I know see.

By the way, in manewrowo2 the cars deposited on the right cannot be moved. The two cars can be coupled, but you can't release the breakes (they won't move no matter what you try to do), and the one car on the track next cannot be coupled (the loco simply goes throuh it).

Balage

Offline Winger

  • Administrator
  • Wiadomości: 1465
    • Zobacz profil
    • http://www.winger.eu07.pl
  • Otrzymane polubienia: 1
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #19 dnia: 10 Listopada 2004, 15:11:15 »
You probably use one of newest unofficial versions of exe file. It'll be fixed in nearest version, along with some other things (e.g. more realistic brake pneumatics behaviour, crash-on-newer-drivers bug fixed).
Pozdrawiam,
Winger

Balage

  • Gość
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #20 dnia: 10 Listopada 2004, 15:41:38 »
Cytat: "Winger"
You probably use one of newest unofficial versions of exe file.

I use the 160704 version.

Cytat: "Winger"
It'll be fixed in nearest version, along with some other things (e.g. more realistic brake pneumatics behaviour, crash-on-newer-drivers bug fixed).

Good. I look forward to it.

Balage

Anonymous

  • Gość
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #21 dnia: 10 Listopada 2004, 18:03:36 »
Yes but how do you change the points?

--
Jason M

Offline Winger

  • Administrator
  • Wiadomości: 1465
    • Zobacz profil
    • http://www.winger.eu07.pl
  • Otrzymane polubienia: 1
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #22 dnia: 10 Listopada 2004, 18:14:01 »
Change what?
Pozdrawiam,
Winger

Offline hejnal

  • ZbanowanyZbanowany
  • Wiadomości: 967
    • Zobacz profil
  • Otrzymane polubienia: 3
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #23 dnia: 10 Listopada 2004, 18:50:00 »
Cytat: "Winger"
Change what?

Rails switch?

Anonymous

  • Gość
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #24 dnia: 10 Listopada 2004, 19:08:43 »
Cytat: "Winger"
Change what?


Sorry I mean't how do I switch tracks in the indrustial layout when shunting.

--
Jason M

Balage

  • Gość
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #25 dnia: 11 Listopada 2004, 09:52:39 »
Hi Jason,

you can switch the rail switches by pushing SHIFT+1, 2, 3, ...9.
The shift +1, 2, 3 control the sidings to the left (where the loco stands at startup).
Shift 4, 5 controls the switch on the right siding.
Shift 6, 7 control two switches parallel, in the two parallel "main" tracks (one at the beginning and one at the end).
Finally Shift 8, 9 controls the first switch at the "gate".

Balage

Anonymous

  • Gość
New Routeeeeeeeeeeeeeeee!
« Odpowiedź #26 dnia: 11 Listopada 2004, 20:55:44 »
Thanks for your help Balage, I have got it all sorted now.

--
Jason M