- Symulator MaSzyna -

MaSzyna International => EU07 Simulator English forum => Wątek zaczęty przez: Anonymous w 08 Października 2004, 21:47:40

Tytuł: It works
Wiadomość wysłana przez: Anonymous w 08 Października 2004, 21:47:40
Hello All,

A while ago I said that I could not get the latest version to work because of my gfx card, geforce Ti4200 with latest drivers.
Well I have now changed to a Radeon 9800 pro and what a difference, I can now play the latest version of this sim and it is very smooth.

A quick question, I have tried to get the EN57 to move but it just will not ? I think I have done everything, I have got power and the brakes have released. Could someone just go through all that I have to do when entering the cab for the first time.
Thanks in advance.

Jason M
Tytuł: It works
Wiadomość wysłana przez: Bartek w 08 Października 2004, 22:24:27
Brief summary of EN57:
- rise pantograph, (O)
- turn the main power relay on, (M)
- turn compressor on, (C)
- open door, (> or <)
- main brake line pressure overload, (, Num Pad)
- set brake to the running position, (4 Num Pad)
- give departure signal, (?)
- close door, (. or ,)
- set reverser to driving position, (d)
- set master controller to the first position; while the unit speeds up, set it to another positions. Master controller positions:
  1) shunting drive
  2) drive I
  3) drive II
  4) field shunting I
  5) field shunting II
  6) field shunting III
Tytuł: It works
Wiadomość wysłana przez: Anonymous w 09 Października 2004, 11:36:08
Thanks for the reply but i have tried all of that.
I have to use Shift and O, M and also X to get the unit on line and did actually somehow get it moving but when i tried again later no joy, can someone actually while starting this train write down exactly what they do?
I expect I am missing doing something.

Thanks again.

Jason M
Tytuł: It works
Wiadomość wysłana przez: ShaXbee w 09 Października 2004, 18:50:04
You must wait after pressing for 15-40 seconds - you should hear "click" - this means that the pantograph is fully raised. Then you can proceed to next steps.
Tytuł: It works
Wiadomość wysłana przez: Grizebar w 19 Listopada 2006, 02:10:40
Cytat: "ShaXbee"
You must wait after pressing for 15-40 seconds - you should hear "click" - this means that the pantograph is fully raised. Then you can proceed to next steps.


Also, press the Space Bar to turn off the warning interlock.